Diakat cutting machines are designed for precise and efficient cutting of hard surfaces. They are equipped with diamond blades or other specialized cutting tools to handle tough materials like concrete, asphalt, and stone. These machines are commonly used in roadwork, construction, and renovation projects to create clean cuts for joints, expansions, or cracks for the asphalt grout. With adjustable cutting depths, they offer versatility for different applications, ensuring accuracy and speed.
Crack chaser
RK–10 is designed for cutting of cracks in asphalt and concrete prior to sealing. The rear wheels are mounted on a steering pivot thus insuring great maneuverability which enables the machine to follow the cracks easily. The machine uses 205 mm TUCK POINT diamond blades for dry cutting up to the depth of 50 mm.
Joint cutter
RK–10E is mainly used by flooring specialist for cutting joints in different surfaces, like concrete, anhydrite, epoxy and similar. It can be used for re-opening of old joints or for making new joints (dilatations). The machine can use up to 205 mm diamond blades and allows dry as well as wet cutting up to the depth of 50 mm.
Roofing saw
RK–10S is a saw designed to cut asphalt (bituminous) flat roofing and similar horizontal insulations to sections which can be easily manipulated. The saw uses blade of 300 mm diameter with TC tips. The machine is designed to dry cutting. To prevent engine and other rotating mechanical parts get choked by the soft debris, the machine is fully covered. Thanks to this design the maintenance of the machine is a lot easier. Blade with TC tip sis primary intended for cutting softer materials without any reinforcement. Due to the unique shape of the blade, clogging of the blade by the soft asphalt sticky debris is limited.
Floor saw RSD-500
The RSD–500 floor saw is designed to cut concrete and asphalt surfaces, using diamond cutting blades. The maximum blade diameter is 500 mm and maximum depth of the cut is 200 mm. Machine is equipped with a split blade guard. The front end of the blade guard can be detached enabling cuts to be run close up to walls. Cooling water can be supplied to the machine either by external source or from water tank mounted on the machine.
Floor Saw
The RSD–500E Floor Saw is designed to cut various surfaces, using diamond cutting blades, mainly in enclosed areas. The maximum blade diameter is 525 mm and the maximum depth of cut is 200 mm. The machine can be equipped with segmented tool cover, the front end of the tool cover can be detached thus enabling cuts to be run close up to walls. Cooling water can be supplied to the machine either by external source or from tank mounted on the machine.
Hot air lance
LH–700 is easily manageable hot air lance. The compressed air passes through a coil placed in a protective tube where it is heated. The heating flame is regulated by means of valve placed on the handle of the gas burner. The fine tuning of the air temperature is achieved by mixing of the hot air with a cold air at the mouth of the directional nozzle. This powerful machine is used to clean and preheat the joint before applying the asphalt grout.